The Exige S is known for heat soaking and extremely high IATs (intake air temps). The stock intercooler is mounted on top of the hot engine and doesn’t get nearly enough airflow through the small roof scoop. It also doesn’t help that the hot air from the radiator exits in front of the windshield and makes its way into the roof. There are some things you can do to help like a larger intercooler, additional ducting from the side scoops, larger roof scoops, or adding fans to the intercooler…
Round 5 of the 2019 NASA Super Touring Championship
When 4 out of 5 cars from your team are damaged after a race weekend, you know that some stuff went down. We were really excited about this weekend at Thunderhill because the weather looked dry, albeit hot (105F), and we had just confirmed a week earlier while testing at Buttonwillow that any overheating issues had been resolved (we upgraded a lot of things after Round 4 at Sonoma in June). This would also be my first time driving the E36 at Thunderhill (since Graham had covered for me there during Round 2 in April while I was in Japan).
Trackspec's Exige S240 Project: Part 4, Completed Aero
This past Monday, June 24, we decided to take a team day-off to go to the track with Golden Gate Lotus Club. In addition to drives, meets, and fun outings, GGLC hosts great track & autocross events. Only three run groups, so you get SEVEN sessions! Not to mention, they always offer snacks, coffee, fruits, and sometimes even lunch!
Round 4 of the 2019 NASA Super Touring Championship
NASA ST4 Round 3 At Sonoma Raceway
West Coast Lotus Meet x GGLC Thunderhill West
As a Lotus mechanic for the last 9 years and recently becoming a first-time owner, we were able to attend one of the days of the annual West Coast Lotus Meet this year! On Thursday, May 16, 2019, We participated in the trackday portion of the event, which was held at Thunderhill West, and hosted by Golden Gate Lotus Club.
NASA ST4 Round 2 at Thunderhill Raceway
“Heidi” left for Round 2 of NorCal Super Touring Championship a day earlier than usual because Tom was in Japan - which meant that Graham assumed driving duties for this particular race weekend. We were excited because Jon had rebuilt the engine with brand new rod bearings, a new oil pump, and added an accusump system to help mitigate the low oil pressure issues we ran into at Sonoma in March. Shout-out to Jim from MMI Vehicle Systems and West Coast Ravenol for the fresh parts and fluids! On Thursday evening, Liam and Graham stopped by the shop to pick up the car and then they were off to Thunderhill.
Trackspec's Exige S240 Project: Part 3, More Goodies
It’s no secret that Reverie makes high quality (wind tunnel tested) aero parts for the Eliges and I’ve always liked their front splitter design. Although Reverie’s mounting solution works great and is solid, I decided to attach the splitter directly to the chassis, and not to the front clam. My reason for this is so that I can easily remove the front clam without having to remove the splitter first. This did require cutting the front lower portion of it so that it could just rest on top of the splitter…
2019 NASA Super Touring Round 1: Sonoma
After our successful test day at Sonoma on Friday March 1st, Graham and I brought “Heidi” down to SS Customs in Redwood City, CA that very same evening for the installation of this year’s livery. I was thrilled to once again partner with Adam and Scott from Skepple on the design, and my longtime friend, Shareef, from SSC on the print/install. The plan was that they would finish the car in time for the season opener, and boy...did they deliver!
Heidi Build
Following my crash at Sonoma last October I spent some time thinking about what I wanted to do next. I knew I wanted to continue racing with NASA in Super Touring because the ST4 class is growing steadily and we have great camaraderie amongst the competitors in the field. For a brief moment, I actually considered building another S2000 but realized after 9 years with the platform that it was time to move on and do something new. As such, in November we began tearing down what was left of “Irene” and selling any remaining/usable parts.
Trackspec's Exige S240 Project: Part 2, Wrap
When we first acquired the Exige, Victoria and I had multiple conversations about what we wanted to do with it. Our original plan was to keep it street-legal, and just use it for canyon driving and the occasional HPDE events. I knew that it would have a much higher resale value if it was kept street-legal. Plus, being that this is our first Lotus, we liked the idea of being able to take it out every now and then. We also wanted to take it on long road trips and enjoy some of the fun back roads we have here in California. …Well, that idea didn’t last too long.
Trackspec's Exige S240 Project: Part 1, Rebuild
My first encounter with Lotus cars was when I was 18 years old and I signed up first my autocross in my 1996 Acura Integra with the Golden Gate Lotus Club (GGLC). I always thought they were “cool” looking and after going on a couple ride-alongs, I could already tell how fun it would be to drive one. ...